Start this week
Five moves that pay off before you read another word. The rest of the guide explains each one.
- 1Write down your minimum charge and quote it on every call.
- 2Make a list of the jobs you won't take, and the people you refer them to.
- 3Price your ten most common jobs flat and post them.
- 4Follow up on every estimate you sent in the last two weeks.
- 5Ask your last ten customers what else is on their list.
Numbers to know
1 to 2 hours
A common minimum charge, so short jobs still cover the drive and setup.
15 to 25%
A common markup on materials you buy for the job, to cover the trip, the receipts and the returns.
30 to 50%
A common deposit on bigger projects, taken before you buy materials.
2 to 3 days
When to follow up on an estimate. Most jobs are lost to silence, not to a lower price.

Part 1
Decide what you do and what you charge
A handyman business lives or dies on the jobs it says no to. Small jobs at no minimum and big jobs priced like small ones are how good tradespeople stay broke.
- 01
Know your legal limits before you quote
Many states cap what you can do without a contractor's license, by dollar amount per job or by type of work. Electrical, plumbing and gas work often need a licensed trade no matter the size.
How to do it
- 1Look up your state's handyman exemption: the job size you can take without a contractor's license.
- 2Check which trades need a license for any work, even small repairs.
- 3Pull permits when a job needs one, or refer it out.
- 4Keep a short list of licensed pros to refer to. They'll send you their small jobs in return.
- 02
Carry insurance and put every estimate in writing
One cracked tile or flooded ceiling can cost more than a year of profit. Insurance and written estimates protect you, and both make customers more comfortable saying yes.
How to do it
- 1Carry general liability insurance and say so wherever customers find you.
- 2Write every estimate with the scope, the price, what's not included and how long it's good for.
- 3Get a signature or a written yes before you start anything over a few hundred dollars.
- 4Write down any change the customer asks for mid-job, with the new price.
- 03
Set a minimum charge and a trip fee
Driving 25 minutes to hang one picture loses money. A minimum covers your drive and setup, and it encourages customers to save up a list.
How to do it
- 1Set a minimum of one to two hours of labor, and quote it on every call.
- 2Add a trip fee for homes outside your normal area.
- 3Tell customers the minimum covers as much of their list as you can finish in that time.
- 04
Price the common jobs flat
Customers would rather hear "$145 to mount a TV" than "$75 an hour." Flat prices are easier to say yes to, and when you're fast you earn more than your hourly rate.
Automate it: Post the flat-rate list where customers book, so the price question is answered before they call and you only update it in one place.
How to do it
- 1List the jobs you do most: TV mounting, faucets, ceiling fans, drywall patches, door adjustments.
- 2Time each one, then price it at your hourly rate plus a cushion for surprises.
- 3Keep hourly pricing for repairs you can't see until you open them up.
- 4Mark up materials and say so in your estimate.

Part 2
Get found by homeowners who need you
Homeowners search when something breaks and choose whoever looks reliable and answers first. Most of your best work comes from people who already know someone you helped.
- 05
Put your prices and booking on your own site
A real site with your prices, your work and a way to book tells people you show up and do the job right. It also saves you the calls from people who were never going to pay your rate.
Automate it: A site that takes bookings and shows your prices works while you're on a ladder. Runza builds one from a short conversation about what you do and charge, on your own domain.
How to do it
- 1Lead with what you do, the area you serve and how to book.
- 2Use your own domain and put it on your truck, your cards and your invoices.
- 3Show real job photos, not stock images.
- 06
Post short videos of the work
A rotted deck board coming out and a new one going in shows skill better than any description. Short job videos are free advertising for neighbors who need the same thing.
Automate it: Record the whole job on your phone and let software cut it into short, captioned clips. One recording gives you several posts.
How to do it
- 1Film the before, a few seconds of the work and the after.
- 2Say the job and the neighborhood, never the address.
- 3Post consistently. One clip a week beats a burst once a quarter.
- 07
Run a deal when the calendar is slow
Most handymen are slammed in spring and fall and quiet in between. A timely deal, like gutter cleaning in October or caulking before winter, fills the gaps without cutting your main prices.
Automate it: Keep a deals section on your site you can swap out each month, so every slow season has an offer ready without a new flyer.
How to do it
- 1Look at last year's calendar and find your slow weeks.
- 2Pick a seasonal job and offer a set price or a bundle, not a blanket discount.
- 3Give it an end date so people act.
- 08
Get on the lists of realtors and property managers
Realtors need punch lists done before closing, and property managers need turnovers done fast. One good relationship can keep you booked every week.
How to do it
- 1Introduce yourself to three local agents and two property managers with your card and a short price list.
- 2Offer fast turnaround on inspection repairs. That's what they need most.
- 3Send photos and an invoice the same day the job's done, so they can pass it along.
See it set up for your business, free
A mockup of your website and the back office behind it. No account needed.

Part 3
Book the whole list and get paid
The money is made by doing the whole list in one visit and getting paid before you pull out of the driveway.
- 09
Have customers send their whole list when they book
One trip with five jobs pays far better than five trips with one. When you see the list up front, you bring the right parts and size the visit right.
Automate it: Use a booking form where customers pick a visit length and type out their whole list, so the job lands on your calendar with every task already on it.
How to do it
- 1Ask for the full list and photos when they book.
- 2Book a visit length that fits the list, a half day or a full day.
- 3Ask about parking, pets and access so you don't lose time at the door.
- 10
Quote bigger projects properly, with a deposit
A bathroom refresh or a new deck is a different job than a repair visit. It needs a site visit, a written estimate and a deposit before you buy materials.
Automate it: Send bigger jobs through a separate consultation request that asks about the house and the project, so they reach your inbox ready to quote instead of mixed in with repair visits.
How to do it+ a message to send
- 1Ask for the project, the house and photos before you go out.
- 2Send the estimate within two days of the visit.
- 3Take a deposit, often 30 to 50%, before you order materials.
- 4Refer out anything above your license limit.
Estimate email Hi [Name], thanks for having me out to look at the [project]. The estimate is attached: [price], which includes [scope] and materials. I can start [date]. To hold the date and order materials I take a [percent] deposit, and the rest is due when the job's done.
- 11
Answer the questions you get every day
Are you licensed? Do you have a minimum? Do you bring materials? Do you do electrical? Answer them once and the calls you get are from people ready to book.
Automate it: Write the answers into an FAQ, then let a chat assistant on your site answer from it and book visits while you're working.
How to do it
- 1List the questions you've answered more than three times this month.
- 2Answer each the way you'd say it on the phone, including what you don't do.
- 3Return the rest the same day. The first handyman to call back usually gets the job.
- 12
Get paid before you leave
Invoices you send later get paid later, or not at all. Taking payment on the spot is normal for service work and keeps your cash flowing.
Automate it: Take a tap on your phone or an online card payment at the end of the job, with the money going straight to your bank.
How to do it
- 1Tell customers at booking that payment is due when the job's done.
- 2Walk them through the finished work, then take payment right there.
- 3Send a receipt with what you did, so they can find it next year.

Part 4
Follow up so the house calls you first
Every house you've worked on will need something again. Owners who stay in touch become the handyman the family calls for everything.
- 13
Follow up on every estimate
Most estimates that go unanswered weren't lost to a cheaper price. The customer got busy. A friendly follow-up wins a large share of them back.
How to do it+ a message to send
- 1Follow up two or three days after you send an estimate.
- 2Follow up once more a week later, then let it rest.
- 3Ask if anything in the scope should change, not just whether they decided.
Estimate follow-up Hi [Name], it's [You]. Just checking in on the estimate for the [project]. Happy to adjust the scope if that helps. I have an opening on [day] if you'd like to get it done.
- 14
Send seasonal reminders to past customers
Gutters in fall, caulking before winter, decks and screens in spring. A reminder at the right time turns last year's customer into this month's job.
Automate it: Schedule reminders to go out on their own each spring and fall, so past customers hear from you without you writing every one.
How to do it+ a message to send
- 1Send a short spring and fall note to everyone you've worked for.
- 2Name two or three seasonal jobs and ask what's on their list.
- 3Include the link to book.
Fall reminder Hi [Name], it's [You]. Fall is a good time for gutters, weatherstripping and caulking before the cold. If you've got a list going, send it over and I'll find you a spot.
- 15
Keep notes on every house
Knowing the paint color in the hallway or the brand of the water heater makes the next job faster and makes you hard to replace.
Automate it: Have every booking and request add the customer to one list automatically, so their history is there when they call again.
How to do it
- 1Write down paint colors, fixture brands and quirks after every job.
- 2Note what the customer mentioned for later, like the deck that needs staining next year.
- 3Bring it up on the next visit.
See these steps running
Walk through the back office of Level Up Handyman, a sample business: the schedule, follow-ups, invoices and site. Made-up data, no sign-up.

Part 5
Grow past one truck
You can only work so many hours. Growing means knowing your numbers well enough to hire, and not being the one who answers every message.
- 16
Know your real hourly cost
Your billable hours are only part of your week. Driving, quoting, supply runs and invoicing all come out of your rate, and most handymen underprice because they forget them.
How to do it
- 1Add up a year of costs: truck, fuel, insurance, tools, phone, software and taxes.
- 2Divide by the hours you actually bill, not the hours you work.
- 3Add your pay and a profit margin on top, and that's your floor.
- 17
Review what's working every month
The handymen who grow decide what to do next from what's working. An hour a month with your bookings and customer list shows which jobs pay and which customers are due.
Automate it: Tools that read your bookings and customer list can suggest your next few moves, like a seasonal deal to run or customers due for a reminder.
How to do it
- 1Count jobs by type and see which pay best per hour.
- 2Note which seasonal deals booked and which didn't.
- 3Pick three changes for next month and do those.
- 18
Give your crew their own logins
When you add a helper or a second truck, everyone needs to see the schedule without sharing your password.
Automate it: Add each crew member as a teammate with a separate login on your booking system.
How to do it
- 1Give each person access to the schedule and job notes they need.
- 2Keep payments and pricing under the owner's login.
- 3Remove access the day someone leaves.
The short version
Know your limits, charge a minimum, price the common jobs flat, get paid before you leave and follow up on every estimate. The houses you've already worked on will keep you busy for years.
